كاشف ليزر الفرن BG-LD-B

وصف

The laser detector in the furnace is a new generation of high-power laser detector developed by our factory. It is especially aimed at the harsh working sites in the metallurgical industry, and adopts a high power laser with a peak power of 60W.

The semiconductor infrared laser tube is used as the emission source, so it has a very strong penetrating ability and a very long operating distance.

The furnace laser detector has the following characteristics:

1. يمكن أن تعمل في البيئات القاسية (مثل ارتفاع درجة الحرارة, رطوبة, رذاذ الماء, الغبار والبيئات القاسية الأخرى).

2. يمكن أن تعمل بشكل مستمر وموثوق لفترة طويلة.

3. The detector integrates power supply, وحدة التحكم والإخراج, and is easy to install.

Technical parameters:

1. Detection area (distance between transmission and reception): ≤ 100m；

2. Emission light source: Infrared semiconductor laser with a wavelength of 905nm;

3. Peak power of transmission output: 60W;

4. Laser safety level: CLASS IIIb；

5. Output:

(1) Transmitter:

A set of normally open and normally closed relay signal outputs: When the transmitter is working normally, the relay is disconnected; When the transmitter is working abnormally, the relay closes. Maximum load capacity DC30V/10A, 250VAC/10A

(2) Receiver:

A set of push-pull level output: maximum load capacity of 100mA, with overload protection and short circuit protection. The output polarity can be switched through an internal on-off dip switch, with a response time of 10ms.

A set of relay outputs: response time of 20ms, maximum load capacity of DC30V/10A, 250VAC/10A

Optional energy receiving alarm output: MOS relay output, maximum load capacity DC60V/2.5A. When the received energy is ≤ 20, the MOS relay closes

6. Environmental temperature range- 25℃~70℃

7. Power consumption: transmitter 5W; Receiver no-load power consumption 5W, full load power consumption 15W

8. Anti environmental light drying: 10000لاكس, suitable for detecting objects below 1200 درجة مئوية.