Baisteels
Overview:
The digital intelligent looper scanner is mainly used in the metallurgical industry system to realize tension-free control of wires and bars. When there is no water cooling, the detector can work reliably for a long time in the environment of temperature up to 70 °C. After cooling with water, the detector can work at an ambient temperature of 120°C.
The digital smart looper scanner has the following features:
a. With the function of automatic sensitivity adjustment, the user does not need to adjust the detector sensitivity during installation and use.
b. It has the function of direct display of quantity (digital display), which makes installation and debugging more convenient.
c. It can completely replace the looper detectors of DELTA and DENIALI CEDA.
d. Three kinds of signals can be output: voltage quantity, current quantity and switch quantity.
Principle:
The detector receives infrared rays radiated from high-temperature objects (wires, bars) and directly image it on the CCD sensor. Through the optical system, the position of the object in the detection area and the position of the image on the CCD are in a one-to-one correspondence, which is in a linear relationship. into an signal corresponding to the position of the object. The detector has two output forms, which can be output at the same time, one is output , and the other is switch output (contact output and level output).
Response Spectrum Range: 780nm–1200nm
Wire Rod Temperature Range: 700°C–1400°C
Response Time: Analog quantity (4ms)
Switching Quantity (Electrical Level ≤4ms; Contact ≤20ms)
Field of View Angle: 10°, 30°, 50°
Operating Temperature: -25°C–70°C (Without Cooling Water)
10°C–120°C (With Cooling Water)
Installation Distance: 0.5m–4m
Operating Power Supply: DC24V (DC18V–DC30V) (With Polarity Protection)
AC220V (DC18V–DC30V)
Power Consumption: No-load ≤5W
Auxiliary Alignment: Green Linear
Output:
a. 0-10V Voltage Analog Output: Maximum Output Current 10mA
4mA-20mA Current Analog Output: Load Resistance ≤500Ω
Relay Contact Output: Maximum Contact Capacity: AC 250V 10A, DC 30V 10A
Push-Pull Level Output: High and Low Groups, Maximum Output Current 100mA
MOS Optocoupler Output: Maximum Load Capacity: 60V 100mA
Cooling Water: Pressure 0.2MPa, Flow Rate 2L/min
Weight: 4.5kg
Wire Rod Temperature Range: 700°C–1400°C
Response Time: Analog quantity (4ms)
Switching Quantity (Electrical Level ≤4ms; Contact ≤20ms)
Field of View Angle: 10°, 30°, 50°
Operating Temperature: -25°C–70°C (Without Cooling Water)
10°C–120°C (With Cooling Water)
Installation Distance: 0.5m–4m
Operating Power Supply: DC24V (DC18V–DC30V) (With Polarity Protection)
AC220V (DC18V–DC30V)
Power Consumption: No-load ≤5W
Auxiliary Alignment: Green Linear
Output:
a. 0-10V Voltage Analog Output: Maximum Output Current 10mA
4mA-20mA Current Analog Output: Load Resistance ≤500Ω
Relay Contact Output: Maximum Contact Capacity: AC 250V 10A, DC 30V 10A
Push-Pull Level Output: High and Low Groups, Maximum Output Current 100mA
MOS Optocoupler Output: Maximum Load Capacity: 60V 100mA
Cooling Water: Pressure 0.2MPa, Flow Rate 2L/min
Weight: 4.5kg
