Laser detectors (reflective) are mainly suitable for the metallurgical industry, achieving automatic detection of opaque objects on production lines. This detector has a long working distance, strong anti-interference performance, easy installation and debugging, and can work continuously and reliably in harsh environments such as humidity, water mist, and dust for a long time. When the ambient temperature exceeds 45 ℃, the detector should be cooled with water. When the ambient temperature exceeds 65 ℃, the SP-17 type reflector should be selected.

Specially added digital energy display, the better the installation angle, the stronger the received signal energy intensity. During on-site installation, by adjusting the installation angle to the maximum received energy intensity, the installation position is ensured to be optimal and the signal surplus is maximized, avoiding the original situation of only action indication and not knowing whether the installation position is the best. Energy alarm output can be optionally selected and connected to the on-site control system to achieve maintenance reminders and avoid faults.

The red laser detector (reflection type) is mainly used in the metallurgical industry to realize the automatic detection of opaque objects on the production line. The detector has a long working distance, strong anti-interference performance, convenient installation and debugging, and can work continuously and reliably for a long time in harsh environments such as humidity, water mist, and dust. When the ambient temperature exceeds 45°C, the detector should be cooled with water. When the ambient temperature exceeds 65°C, the reflector should be SP-17.

In particular, the digital energy display is added. The better the installation angle, the stronger the received signal energy intensity. When installing on site, fine-tune the installation angle to the connection

The maximum energy intensity is ensured to ensure the best installation location and the largest signal margin, avoiding the original only action indication, and it is not known whether the installation location is the best.

It can be equipped with energy alarm output and connected to the on-site control system, which can realize maintenance reminders and avoid failures.